Feature：
* 3528 single color
* Size：1000*8mm
* Beam Angle: 120 °
* LED：600LED/roll (120LED/M)
* NON waterproof IP20
* 3M tape in the back :200MP yellow 3M tape
* Working Voltage ：DC12V
* Working Current : 800mA/M
* Power：9.6W/M
* Brightness :4-5lm/led
* CE Certificated
* PCB : Bouble sides PCB
* Warranty :2 years warranty
Application
*Cove lighting
*Architectural lights for canopy, corridor, window, archway
Backlight or edge lighting for signage
* DIY lights for home use
* Path and contour marking
* Decorative lights for holiday, event, show, exhibition
* Special light effect for art gallery and glass-made items
The following parameter all in DC12V
Item No. | color | LED (pcs/m) | Voltage (V) | Power (W/M) | Color Temperature | Package |
DY-S120F008-3528 | white | 120 | 12 | 9.6 | 5500-6500K | 5m/roll |
Safety Information * The strip itself and all its components may not be mechanically stressed. * Assembly must not damage or destroy conducting paths on the circuit board. * Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. * Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip. * Parallel connection is highly recommended as safe electrical operation mode. * Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip. * Please ensure that the power supply is of adapters power to operate the total load. * When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface. * Pay attention to standard ESD precautions when installing the strip. * Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements
Dimension (mm)
Connection
Inquire it
